Saturday, June 2, 2018

Techniques Of Area Rug And Carpet Cleaning New York

By Jennifer Cole


Everyone loves clean environs, whether it is at home or the workplace. Carpets are part of these environs and they tend to get dirty and soiled as time goes by. The good news is that there is no need to worry when this happens. Carpet cleaning is usually done to enhance their appearance, remove stains, dirt and also any allergens using different cleaning compounds depending on the method chosen. The following are methods of area rug and carpet cleaning New York.

There are different types. These approaches depend on the nature of the material that needs to be cleaned. They include hot water extraction also known as the steam method. This method uses high pressured hot water to agitate the carpet fiber and dissolve any dirt. A cleansing agent is applied on the soiled surface, using a brush and this is followed by rinsing.

Shampooing is the most basic not forgetting the oldest method of cleansing. This technique entails applying a foamy chemical on the mat and scrubbing it using a mobile circular brush. This approach is usually used for carpets that are very dirty or rather heavily soiled carpets as it works wonders for them. This method is also quite economical and can be easily done comfortably at home.

Encapsulation is among the newer techniques in the market. Surprisingly, this approach does not use water for the purpose of cleaning. Instead, it uses chemicals that contain both washing and crystallizing agents. The main aim of the chemicals is to allow suspension of the soil that has already been agitated by the cleaning machine. With this method, absolutely no rinsing, it covers large areas during and there is always the certainty that no dirt attracting residues left behind.

There are also some methods that aim at the top surface of the dirty material. The bonnet method does exactly this. A cleaning compound is applied on the top followed by scrubbing from a round rotating machine usually called the rotating bonnet. In this method, the cleansing agent is usually deposited on the rotating pad. This enables it to easily absorb any foreign material that is present in the fabric.

The dry approach. This is the latest technology that is found in the market. It has gained popularity over the years. The washing compounds are made of biodegradable materials that work like sponges. They effectively absorb the dissolved dirt and can be removed thoroughly at the end of the cleansing process. A cleansing compound is applied to the bottom part of the rug using a rotating brush which enables it to settle in the fiber.

Vacuum washing. It uses water by spraying it and later removing it by sucking it. This back and forth approach ensures effectiveness. It extracts the dirt from the mat. By immediately reabsorbing the water, the drying time is shortened. This method is suitable for different levels of washing. This is because it does not require cleansing products and leaves no detergent residue.

When choosing a method, the size and fiber should always be in mind. It is also good to seek recommendations from reputable sources. Methods like encapsulation are highly recommended by naturalists as they are environmentally friendly. However, it is important to differentiate between sources of information because some sources only want to sell their products and can even give misleading information. In conclusion, always go for the best method that suits you economically.




About the Author:



No comments:

Post a Comment