Excavators are big machines used in removing soil from ground specially on sites for construction of buildings and some other structures. Sometimes, these are mistakenly called power shovels because they use hydraulic technology to achieve their functions which seems an improvement made from steam shovels. But they also have other functions as well.
The attached bucket could be changed into others depending on what task you want them to perform such as auger, grapple or breaker. There are excavator lifting attachments also available in carrying large and heavier objects. This will help you save time and money but being safe on the job is vital so remember to follow these things.
Ensure the capability of your machine to handle a particular material and the load it has so you can avoid it from tipping over. Overloading the excavator will result in damages and injuries on the site, workers and load which consumes time and money too. It should have the capability to handle the item and reach the target while control and stability is maintained.
Your operators must have proper training to read lift charts that the machines they operate have because they can be confusing. Capacity usually changes which depends on various factors like boom angle, swing radii and lift height. The position of the equipment when carrying the object would affect its capacity so these charts should be placed where the operator could immediately see it.
Before using it, inspect for damages and any obstacles and hazards nearby including those in its overhead which could be harder to notice. Be certain that the work surface is stable and the position is far from any excavation edge nearby. Perform a test lift when you have doubts of the stability of the work surface underneath it.
Clear the workers off the area and ensure nobody is near its swing radius when a material is being lifted so they will be protected against falling objects. The person only allowed there is the spotter which should stand somewhere he can give vital information while being clear from the operation. And when swinging, have the load close and extend only when placing on that location desired for more stability.
Make sure the rigging you chose is capable in lifting the attached weight and compatible with the lifted materials. Nylon web slings should not be used to pick up sharp objects that may damage it. Chains are also not advisable to pick up rebar bundles as the slip resistance needed cannot be provided with this unlike with double basket hitch ones.
Make sure the load is secured properly using the right equipment such as latching hooks to ensure its safety. Ways of having it secured vary depending on the number of lift points an object has and all of them must be locked and connected. This would prevent it from tipping, spinning and wobbling or would not shift and come apart.
Take precautions in minimizing risks of shifts that happens suddenly when needed during moving of load. These are some things which helps your workplace become safer. Remember these so accidents can be avoided from happening.
The attached bucket could be changed into others depending on what task you want them to perform such as auger, grapple or breaker. There are excavator lifting attachments also available in carrying large and heavier objects. This will help you save time and money but being safe on the job is vital so remember to follow these things.
Ensure the capability of your machine to handle a particular material and the load it has so you can avoid it from tipping over. Overloading the excavator will result in damages and injuries on the site, workers and load which consumes time and money too. It should have the capability to handle the item and reach the target while control and stability is maintained.
Your operators must have proper training to read lift charts that the machines they operate have because they can be confusing. Capacity usually changes which depends on various factors like boom angle, swing radii and lift height. The position of the equipment when carrying the object would affect its capacity so these charts should be placed where the operator could immediately see it.
Before using it, inspect for damages and any obstacles and hazards nearby including those in its overhead which could be harder to notice. Be certain that the work surface is stable and the position is far from any excavation edge nearby. Perform a test lift when you have doubts of the stability of the work surface underneath it.
Clear the workers off the area and ensure nobody is near its swing radius when a material is being lifted so they will be protected against falling objects. The person only allowed there is the spotter which should stand somewhere he can give vital information while being clear from the operation. And when swinging, have the load close and extend only when placing on that location desired for more stability.
Make sure the rigging you chose is capable in lifting the attached weight and compatible with the lifted materials. Nylon web slings should not be used to pick up sharp objects that may damage it. Chains are also not advisable to pick up rebar bundles as the slip resistance needed cannot be provided with this unlike with double basket hitch ones.
Make sure the load is secured properly using the right equipment such as latching hooks to ensure its safety. Ways of having it secured vary depending on the number of lift points an object has and all of them must be locked and connected. This would prevent it from tipping, spinning and wobbling or would not shift and come apart.
Take precautions in minimizing risks of shifts that happens suddenly when needed during moving of load. These are some things which helps your workplace become safer. Remember these so accidents can be avoided from happening.
About the Author:
Get a summary of the things to consider before choosing a supplier of excavator lifting attachments and more information about a reliable supplier at http://www.curball.com/product now.
No comments:
Post a Comment