Individuals who have a desire to put up the largest and tallest metal flagpoles are encouraged to use colossal flagpoles. This is majorly because these kind of poles meet the architectural standards of the Institutes in America. The standards include the safety measures that need to be in place to handle the wind currents and the load present such as the flag.
The metal that is used to construct the flagpoles is known as A-36 carbon steel and it portrays a high level of strength. This strength has been identified by the way it is used to construct buildings and bridges in the construction industry. A seamless steel concentric is used in joining the sections so as to achieve a uniformed appearance in the poles.
The next process that follows the joining of sections is sandblasting which is done alongside with coating using epoxy primer chemical. The poles are then further coated using aliphatic urethane which is a gloss enamel. This last process results in a perfect gloss effect and color retention. The products are then left to dry before being shipped to the locations that have been mentioned in the clients orders.
Several sizes of these flagpoles are available to the clients based on the requirements, ranging from a height of one hundred feet to four hundred feet. The height of a pole determines the diameter at the bottom and top, where the diameter increases with increase in height. The larger the number of measurements, the larger the size of flag that can be handled.
The highest speed of wind needs to be considered within the site which the pole is to be set. A speed of one hundred and thirty miles per hour can be handled using rods of one hundred and fifty feet in height. On other hand, for poles above that height, the design needs to be specific to handle the speed without failing to consider the kind of location right from a city, coastal area or the countryside.
A client needs to consider the size of his or her flag before ordering for a specific height of a rod from the stores. Poles that range between hundred and two hundred and twenty feet can fully handle a thirty by fifty flag size. On the other hand, a two hundred or three hundred rod can handle a sixty by one hundred flag size. The right kind of flag size helps prevent destruction of flagpole, damage to the flag or injury to individuals.
Some of manufacturing companies have an advanced feature of lighting up the flag at night. Several lighting solutions including solar lighting are available to handle the different sizes of poles. These options have an advantage of being environmental friendly to any site while at the same time being pocket friendly.
Customers are advised to identify manufacturing stores that have a couple of benefits in the purchase of poles. Some of these pros being talked about is presence of reasonable prices of products and warranty guarantee. Clients also have the right to free shipping of their products and servicing whenever there is a problem to be handled.
The metal that is used to construct the flagpoles is known as A-36 carbon steel and it portrays a high level of strength. This strength has been identified by the way it is used to construct buildings and bridges in the construction industry. A seamless steel concentric is used in joining the sections so as to achieve a uniformed appearance in the poles.
The next process that follows the joining of sections is sandblasting which is done alongside with coating using epoxy primer chemical. The poles are then further coated using aliphatic urethane which is a gloss enamel. This last process results in a perfect gloss effect and color retention. The products are then left to dry before being shipped to the locations that have been mentioned in the clients orders.
Several sizes of these flagpoles are available to the clients based on the requirements, ranging from a height of one hundred feet to four hundred feet. The height of a pole determines the diameter at the bottom and top, where the diameter increases with increase in height. The larger the number of measurements, the larger the size of flag that can be handled.
The highest speed of wind needs to be considered within the site which the pole is to be set. A speed of one hundred and thirty miles per hour can be handled using rods of one hundred and fifty feet in height. On other hand, for poles above that height, the design needs to be specific to handle the speed without failing to consider the kind of location right from a city, coastal area or the countryside.
A client needs to consider the size of his or her flag before ordering for a specific height of a rod from the stores. Poles that range between hundred and two hundred and twenty feet can fully handle a thirty by fifty flag size. On the other hand, a two hundred or three hundred rod can handle a sixty by one hundred flag size. The right kind of flag size helps prevent destruction of flagpole, damage to the flag or injury to individuals.
Some of manufacturing companies have an advanced feature of lighting up the flag at night. Several lighting solutions including solar lighting are available to handle the different sizes of poles. These options have an advantage of being environmental friendly to any site while at the same time being pocket friendly.
Customers are advised to identify manufacturing stores that have a couple of benefits in the purchase of poles. Some of these pros being talked about is presence of reasonable prices of products and warranty guarantee. Clients also have the right to free shipping of their products and servicing whenever there is a problem to be handled.
About the Author:
You can get valuable tips for choosing a flagpole supplier and more information about a reliable supplier of colossal flagpoles at http://www.rrflagpole.com/colossal-flagpoles right now.
No comments:
Post a Comment